12" x 48" CINCINNATI-MILACRON "DE" UNIVERSAL CYLINDRICAL GRINDER w/SWING-DOWN INTERNAL GRINDING SPINDLE

12" x 48" CINCINNATI-MILACRON UNIVERSAL CYLINDRICAL

GRINDER w/SWING-DOWN INTERNAL ATTACHMENT

Serial No 35323E77-0001, Ltr DE

EQUIPPED WITH:

Internal Grinding Spindle Attachment (Swing Down Type)

Hydraulic Longitudinal Table Feed

Filmatic Bearings - Manual Infeed - Steady Rest

Grinding Wheel Dresser

Coolant System (Built-In)

CATALOG SPECIFICATIONS:

Swing Over Table, Maximum 12.9375"

Grinding Diameter, Maximum 12.9375"

Distance Between Centers, Nominal 48"

Grinding Wheel Diameter, Standard 14"

Grinding Wheel Width, Standard 1.5"

Grinding Wheel Hole Diameter 5"

Table Swivel Taper Toward Wheelhead 4.5" TPF

Table Swivel Taper Away Wheelhead 1.25" TPF

Table Swivel Angle Toward Wheelhead 9-DEGREES

Table Swivel Angle Away Wheelhead 2-DEGREES

Headstock Swivel Angle Toward Wheelhead 90-DEGREES

Headstock Swivel Angle Away Wheelhead 30-DEGREES

Lower Grinding Wheelhead Swivel Range 90-DEGREES

Upper Grinding Wheelhead Swivel Range 30-DEGREES

Workhead and Tailstock Center Tapers #9 B&S

Workhead Spindle Speeds, Infinite Range 50 to 500 RPM

Table Longitudinal Feeds, Infinite 3 to 220 IPM

Automatic In-Feed at Table Reversal .0002 to .0125 IPR

Grinding Wheelhead Spindle Motor 3 HP

Hydraulic Motor, Horsepower/RPM 1 HP

Internal Grinding Spindle Motor, Horsepower 1 HP

Floor Space Required, L x W 185" x 73"

Weight, Approximately 10000 LBS

F.O.B. OUR WAREHOUSE