35D-Z2 SEVEN METAL CORP "EDM DRILLMATE" EDM DRILL

35D-Z2 SEVEN METAL CORP "EDM DRILLMATE" EDM DRILL

Serial No 35-DSRZ2P602, Model EDM DRILLMATE

EQUIPPED WITH:

Seven Metal Corp Digital Readouts

Dielectric Water System w/Pump

Miscellaneous Tooling

CATALOG SPECIFICATIONS:

Hole Diameter, Range .008" to .125"

Hole Diameter, Range .2MM to 3 MM

Worktable Dimensions, L x W 33.5" x 18"

Table Travel, X-Axis 13.7"

Table Travel, Y-Axis 9.8"

Z-Motor Axis Travel w/Chuck 13.5"

Electro-Guide Travel 6"

Work Tank Dimensions 33.5" x 18"

Workpiece Height, Maximum 14"

Workpiece Weight, Maximum 500 LBS

Ram to Table, Minimum .375"

Power Backslide 7.8"

Water Reservoir Capacity 5 GALLONS

Overall Dimensions, W x D 40" x 36"

Overall Height 85"

Weight Approximately 2060 LBS

NOTE: This Machine Was Designed As An EDM Drill

With The Ability To Produce An Eroded Hole In Any

Material That Is Conductive To Electric. Holes Can

Be Produced In Diameters From .008" to .125".

The Advantages Of Using This Method Include

The Ability To Drill Hardened Materials And Machine

In Or About Difficult Geometric Shapes. Because

Pure Water Is Used As A Dielectric And The Material

Is Melted Rather Than Cut The Need For Secondary

Operations Is Reduced.

F.O.B. OUR WAREHOUSE