25/36.25" X 120" KINGSTON “HR3000” HEAVY-DUTY GAP-TYPE ENGINE LATHE W/TAPER 21” 4-JAW CHUCK & 4-1/6” HOLE THRU SPINDLE
$24,500 (USD)
Description
25/36.25" X 120" KINGSTON HEAVY-DUTY GAP-TYPE ENGINE LATHE W/TAPER ATTACHMENT SERIAL NO. S03680418, MODEL HR3000 EQUIPPED WITH: TAPER ATTACHMENT 4-1/16" HOLE THRU SPINDLE INCH-METRIC THREADING CAPABILITIES THREADING DIAL - POWER RAPID TRAVERSE (4-WAY) 21" 4-JAW CHUCK W/JAWS - HARDENED & GROUND BED WAYS D1-11 CAMLOCK SPINDLE NOSE
CATALOG SPECIFICATIONS:
Hole Thru Spindle 4.06"
Swing Over Bed Ways, Rated 25"
Swing thru Gap 36.25"
Swing Over Cross-Slide 16.5"
Distance Between Centers 120"
Cross-Slide Cross-Feed Travel 21.2"
Compound Rest Travel 9.8"
Tailstock, Spindle Diameter 3.93"
Tailstock, Spindle Travel 11.75"
Tailstock, Spindle Taper #6 MT
(16) Spindle Speeds, Range 12 to 1200 RPM
Thread Changes, Range 2 to 28 TPI
Metric Thread Changes, Range 1 to 14 MM
Motor Horsepower 20 HP
Electrical System 220-440/3/60
Weight Approximately 11600 LBS PRICE: F.O.B. OUR WAREHOUSE
Specifications
| Manufacturer | KINGSTON |
| Model | HR3000 |
| Condition | Used |
| Serial Number | S03680418 |
| Stock Number | 29448 |
| Hole thru spindle | 4.06" |
| Swing over bed ways, rated | 25" |
| Swing thru gap | 36.25" |
| Swing over cross-slide | 16.5" |
| Distance between centers | 120" |
| Cross-slide cross-feed travel | 21.2" |
| Compound rest travel | 9.8" |
| Tailstock, spindle diameter | 3.93" |
| Tailstock, spindle travel | 11.75" |
| Tailstock, spindle taper | #6 MT |
| (16) spindle speeds, range | 12 TO 1200 RPM |
| Thread changes, range | 2 TO 28 TPI |
| Metric thread changes, range | 1 TO 14 MM |
| Motor horsepower | 20 HP |
| Electrical system | 220-440/3/60 |
| Weight approximately | 11600 LBS |