523 GLEASON UNIVERSAL ANGULAR BEVEL GEAR TESTER
Description
MODEL NO. 523 GLEASON UNIVERSAL ANGULAR BEVEL GEAR TESTER
SERIAL NO. 114703 (NEW IN 1978) SUITABLE FOR THE ACCURATE TESTING OF THE RUNNING QUALITIES OF BEVEL AND HYPOID GEAR AND PINION PAIRS UP TO 20" (508MM) IN DIAMETER, WITH SHAFT ANGLES FROM 0 TO 180 DEGREES EQUIPMENT / FEATURES: AIR-ACTUATED MECHANICAL BRAKE UNIVERSAL GUARDS AMMETER FOR MEASURING BRAKE LOAD DRIVE SPINDLE BORE 6"X 3/4" TAPER (#60) X 2-1/2" LONG BRAKE SPINDLE BORE 3-29/32" X 39/64" TAPER #39) x 3" long MANUAL CHUCKING WITH DRAW-RODS FOR BOTH HEADS FULL COMPLEMENT OF ELECTRICS (MOTORS/CONTROLS) FOR 220/440 VOLT, 3-PHASE 50/60 CYCLES PRICE: F.O.B. OUR WAREHOUSE.............$59,500
Specifications
| Manufacturer | GLEASON |
| Model | 523 |
| Condition | Used |
| Serial Number | 114703.0 |
| Stock Number | 27260 |
| At 90-degree shaft angle | 20" (508MM) |
| Maximum center distance for spurs | 10" (250MM) |
| Range of shaft angles | 0 - 180 DEGREES |
| Range of brake torque | 0-40 FT.-LBS |
| Drive spindle vertical offset | +/- 4.5" (114.3MM) |
| Drive spindle speed | 800 RPM |
| Drive spindle taper dia. | 6" (152MM) |
| Drive spindle taper per ft. | 75" (19.05MM) |
| Depth of drive spindle taper | 2.5" (63.5MM) |
| Diameter of drive spindle thru-hole | 5" (127MM) |
| Brake spindle taper diameter | 3-29/32" (99.22MM) |
| Brake spindle taper per ft. | 39/64" (15.48MM) |
| Depth of brake spindle taper | 3" (76.2MM) |
| Diameter of thru-hole | 5" (63.5MM) |
| Main motor 60 hz (50 hz) | 5 HP 1800RPM(1500 RPM) |
| Machine floor space | 64"X 83"(1630X2210MM) |
| Machine overall height | 78" (1890MM) |
| Machine approx. net weight | 10,000 LBS(4,536 KGS) |