13 GLEASON UNIVERSAL ANGULAR BEVEL GEAR TESTER

MODEL NO. 13 GLEASON UNIVERSAL ANGULAR BEVEL TESTING MACHINE

SERIAL NO. 18943 SUITABLE FOR THE RUNNING TESTING/CHECKING FOR SMOOTHNESS AND QUIETNESS OF OPERATION, AND INSPECTION OF ACTUAL TOOTH CONTACT, UNDER LOAD, (TOOTH BEARING), ON A WIDE VARIETY OF STRAIGHT AND CURVED TOOTH BEVEL GEARS OF ANY SHAFT ANGLE, INCLUDING HYPOID, SPUR, HELICAL, INTERNAL GEARS, AS WELL AS WORM AND WORM WHEEL COMBINATIONS UP TO 13” MAXIMUM DIAMETER. EQUIPMENT / FEATURES: 4 SPEED MAIN DRIVE MOTOR W/DRUM SWITCH SPEED SELECTOR 3 HP, 3PHASE, 60 CYCLES, 220 VOLTS 2-STEP DRIVE PULLEY FORWARD/REVERSE DIRECTION SPINDLE ROTATION VIA PUSH BUTTON MANUAL SPINDLE BRAKING, WITH LOAD METER FULL COMPLEMENT OF ELECTRICS (MOTORS/CONTROLS) HAND-WHEELS, GUARDS, COVERS

PRINCIPAL SPECIFICATIONS:

Maximum diameter gear (nominal) 13" (330.2mm)

Range of angles 0 to 180 degrees

Range of offset pinion spindle: Above center 8" (203.2mm)

Range of offset pinion spindle: Below center 2" (50.8mm)

Max. center distance, (spurs, helicals and herringbones) 8" (203.2mm)

Drive spindle bore (large end) 3-29/32" (99.2mm)

Drive spindle bore, (taper per ft) 39/64" (15.478mm)

Brake spindle bore, (large end) 2-19/64" (58.34mm)

Brake spindle bore, (taper per ft) 1/2" (12.7mm)

Floor space 60.5" x 80.5" (1537x2045mm)

Approx. machine net weight 5,200 lbs. (2364 kGs) PRICE: F.O.B. OUR WAREHOUSE