516 GLEASON “HYPOID” SPIRAL BEVEL GEAR LAPPER

MODEL NO. 516 GLEASON HYPOID SPIRAL BEVEL GEAR LAPPING MACHINE SERIAL NUMBER 649409 SUITABLE FOR LAPPING OF AUTOMOTIVE AND TRUCK SPIRAL BEVEL AND HYPOID GEARS AND PINIONS OPERATING AT A 90-DEGREE SHAFT ANGLE WITH GEAR DIAMETERS UP TO 24" (609MM) EQUIPMENT / FEATURES: EDDY CURRENT BRAKE HYDRAULIC POWER SUPPLY UNIT W/ACCUMULATOR HYDRAULIC CHUCKING UNIT BOTH HEAD S(LESS DRAW-IN BARS) POWER MOVEMENT OF DRIVE HEAD IN AND OUT AUTOMATIC PRESET BACKLASH DRIVE HEAD SPINDLE BORE 3-39/32" DIA. X 39/64" TAPER BRAKE HEAD SPINDLE BORE 2-19/64" DIA. X .5" TAPER SPECIAL LAPPING GUARDS FOR 24" DIAMETER SPC (SWING-PINION-CONE) FEATURE, 3-WAY OSCILLATION FOR PINION HEAD FULL COMPLEMENT OF ELECTRICS (MOTORS/CONTROLS) FOR 50/60 CYCLE

PRINCIPAL SPECIFICATIONS:

( BASIC CAPACITIES )

Maximum gear diameter  24" (609mm)

Maximum pinion diameter  12" (304mm)

Offset of gear spindle above or below

 center of pinion spindle (maximum)  6" (152mm)

( PINION SPINDLE )

Diam of taper hole at large end   3-29/32" (99.2mm)

Taper per foot  39/64" (15.478mm)

Depth of taper  3" (73.5mm)

Diameter of hole through spindle  3.740" (94.996mm)

( GEAR SPINDLE )

Diam of taper hole at large end  2-19/64" (58.34mm)

Taper per foot  ½" (12.7mm)

Depth of taper  3" (76.2mm)

Diameter of hole through spindle  2.167" (55.04mm)

( ELECTRICAL EQUIPMENT)  60 CYCLE 50 CYCLE

Main Motor, 5 HP  1800 RPM 1500 RPM

Hydraulic Motor, ¾ HP  1800 RPM 1500 RPM

Lapping Compound Pump Motor,1 HP  1200 RPM 1000 RPM

Oscillating Drive Motor, ¼ HP  0 to 1725 RPM

( MISCELLANEOUS )

Floor Space  85"x82" 216cmx208cm

Height  82" 208cm

Net Weight (Approx)  11,200 lbs 5,080 kg Price: F.O.B. OUR WAREHOUSE