MODEL 119 GLEASON HYPOID SPIRAL BEVEL GEAR LAPPER
MODEL 119 GLEASON HYPOID SPIRAL BEVEL GEAR LAPPER
$27,500 (USD)
Description
MODEL 119 GLEASON HYPOID SPIRAL BEVEL GEAR LAPPER SERIAL NO. 608406 SUITABLE FOR THE LAPPING OF HARDENED HYPOID GEARS AND PINIONS UP TO 17” (432MM) DIAMETER, OPERATING AT A 90-DEGREE SHAFT ANGLE THE MACHINE IS BEING OFFERED IN FIRST CLASS CONDITION THROUGHOUT AND HAVING BEEN PROFESSIONALLY REBUILT BY GLEASON SERVICE SPECIALISTS. EQUIPMENT / FEATURES: AUTOMATIC LAPPING CYCLE AUTOMATIC BACKLASH CONTROL STANDARD SPLASH GUARD ARRANGEMENT HYDRAULIC CHUCKING ATTACHMENT DYNAMOMETER-TYPE BRAKE FOR LOAD SIMULATION FULL COMPLEMENT OF ELECTRICS (MOTORS/CONTROLS)
Specifications
| Model | 119.0 |
| Condition | Used |
| Serial Number | 608406.0 |
| Stock Number | LTC1283 |
| To nose of pinion spindle (maximum) | 10-1/2" (267MM) |
| To nose of pinion spindle (minimum) | 6-1/4" (169MM) |
| To nose of gear spindle (maximum) | 10-3/4" (273MM) |
| To nose of gear spindle (minimum) | 5" (172MM) |
| Center of pinion spindle (maximum) | 3" (76MM) |
| Diameter of gear (maximum nominal) | 17" (432MM) |
| Diameter of gear (maximum actual w/extended guard | 22” (559MM) |
| Vertical | .040" (1.0MM) |
| Horizontal | .040" (1.0MM) |
| Backlash | .150" (3.8MM) |
| Diameter of spindle taper hole at large end | 3-29/32" (100MM) |
| Spindle taper per foot 39/64" | (15MM) |
| Depth of spindle taper 6" | (152MM) |
| Diameter of hole through spindle 3-1/2” | (89MM) |
| Hydraulic pump | 3/4 HP, 1800 RPM |
| Drive spindle speed | 600 & 1200 RPM |
| Main motor (two-speed) | 2-1/2 HP, 900 RPM |
| Lapping compound pump motor | 1/2 HP, 1800 RPM |
| Oscillating drive motor | 1/15 HP, 0 TO 1725 RPM |
| Floor space | 64" X 90" (163X229CM) |
| Lapping guard closed | 59-1/2" (151CM) |
| Lapping guard open | 81-1/4" (206CM) |
| Net weight | 11,000 LBS (5000 KG) |