119 GLEASON HYPOID SPIRAL BEVEL GEAR LAPPER
119 GLEASON HYPOID SPIRAL BEVEL GEAR LAPPER
$27,500 (USD)
or
Call +1 513-771-1952
Description
MODEL 119 GLEASON HYPOID SPIRAL BEVEL GEAR LAPPER SERIAL NO. 608406 SUITABLE FOR THE LAPPING OF HARDENED HYPOID GEARS AND PINIONS UP TO 17” (432MM) DIAMETER, OPERATING AT A 90-DEGREE SHAFT ANGLE THE MACHINE IS BEING OFFERED IN FIRST CLASS CONDITION THROUGHOUT AND HAVING BEEN PROFESSIONALLY REBUILT BY GLEASON SERVICE SPECIALISTS. EQUIPMENT / FEATURES: AUTOMATIC LAPPING CYCLE AUTOMATIC BACKLASH CONTROL STANDARD SPLASH GUARD ARRANGEMENT HYDRAULIC CHUCKING ATTACHMENT DYNAMOMETER-TYPE BRAKE FOR LOAD SIMULATION FULL COMPLEMENT OF ELECTRICS (MOTORS/CONTROLS)
Specifications
| Model | 119.0 |
| Condition | Used |
| Serial Number | 608406.0 |
| Stock Number | LTC1283 |
| To nose of pinion spindle (maximum) | 10-1/2" (267MM) |
| To nose of pinion spindle (minimum) | 6-1/4" (169MM) |
| To nose of gear spindle (maximum) | 10-3/4" (273MM) |
| To nose of gear spindle (minimum) | 5" (172MM) |
| Center of pinion spindle (maximum) | 3" (76MM) |
| Diameter of gear (maximum nominal) | 17" (432MM) |
| Diameter of gear (maximum actual w/extended guard | 22” (559MM) |
| Vertical | .040" (1.0MM) |
| Horizontal | .040" (1.0MM) |
| Backlash | .150" (3.8MM) |
| Diameter of spindle taper hole at large end | 3-29/32" (100MM) |
| Spindle taper per foot 39/64" | (15MM) |
| Depth of spindle taper 6" | (152MM) |
| Diameter of hole through spindle 3-1/2” | (89MM) |
| Hydraulic pump | 3/4 HP, 1800 RPM |
| Drive spindle speed | 600 & 1200 RPM |
| Main motor (two-speed) | 2-1/2 HP, 900 RPM |
| Lapping compound pump motor | 1/2 HP, 1800 RPM |
| Oscillating drive motor | 1/15 HP, 0 TO 1725 RPM |
| Floor space | 64" X 90" (163X229CM) |
| Lapping guard closed | 59-1/2" (151CM) |
| Lapping guard open | 81-1/4" (206CM) |
| Net weight | 11,000 LBS (5000 KG) |