24A GLEASON "CONIFLEX" STRAIGHT BEVEL GEAR GENERATOR w/HYDRAULIC CHUCKING

MODEL NO. 24A GLEASON "CONIFLEX" STRAIGHT BEVEL GEAR GENERATING MACHINE SERIAL NUMBER 637001, (NEW 1964) COMBINATION ROUGHER/FINISHER, SUITABLE FOR "GENERAL JOBBING" PRODUCTION OF STRAIGHT BEVEL (CONIFLEX/CROWN) GEARS UP TO 35.5 (901MM) PITCH DIAMETER, (AT 10:1 RATIO), 6" (125MM) FACE-WIDTH, WITH CUTTING CAPABILITY UP TO 1.25 DP (20.4 MODULE) EQUIPMENT / FEATURES: UNIVERSAL FEED CAM, DOUBLE-TRACK, FOR ROUGHING AND/OR FINISHING WORK HYDRAULIC CHUCKING ATTACHMENT (LESS DRAW-BAR & NUT) SELF-CONTAINED HYDRAULIC SYSTEM COUNTER/STOP STOCK DIVIDING GAUGE ROUGHING YOKE & BUSHING FINE-FEED ADJUSTMENT FEATURE ONE SINGLE SET-UP OF CHANGE GEARS FOR INDEX, ROLL, RATIO OF ROLL, FEED AND SPEED GLEASON AUTO-STOP GUARDS/COVERS AND OPERATORS STEP PLATFORM FULL COMPLEMENT OF ELECTRICS (MOTORS/CONTROLS)

PRINCIPAL SPECIFICATIONS:

Longest cone distance (1 3/4" stroke) 18"  (457mm)

Shortest cone distance 0"

Maximum pitch diameter:

 10 to 1 ratio 35.5"  (901mm)

  2 to 1 ratio 31.75" (805mm)

  1 to 1 ratio 25" (635mm)

Minimum pitch angle  5.42 degrees

Extreme ratio  10 to 1

Maximum pitch  1.25 DP  (20.4 module)

Maximum pitch angle (shafts at 90 degrees)  84.18 degrees 

Maximum face length  6"  (152mm)

Index range  10 to 100 inclusive and most numbers up to 200

Work spindle bore:

 diameter (large end of taper)  6"  (152mm)

 taper per foot  .75"  (18mm)

 depth of taper   6"  (152mm)

 diameter of thru bore   5”  (127mm)

 Spindle nose to machine center   5”-26”  (127-660mm)

Speed and Feeds:

 Cutter speeds (strokes per minute) 22 to 170

 Feeds (seconds per tooth) (22 feeds) 23 to 645

Floor space required   74" x 105"  (1880x2660mm)

Machine net weight   24,400 lbs.  (11,295 kGs) 

NOTE: PREVIOUS OWNER ADVISES SLIDES WERE REBUILT BY DAYTON MACHINE TOOL BUILDERS APPROXIMATELY ONE YEAR AGO. PRICE FOB OUR WAREHOUSE $49,500.00